What Do You Name Date Fields?

I have seen too many date fields that have been named after reserved key words that I need to make an entry for this... It's like naming your kid "Kid". Wait a sec... that's happened many times before as well.

I will make a "Proper Naming Conventions" page for mySQL after checking a few more sources first, but this date naming issue cannot wait another day.

Thus..

First Rule: Do not use a reserved word for your field name!
Second Rule: Your date-related field name can actually include the word date or datetime in it!

Examples:

datetime_inserted
datetime_modified
datetime_joined
date_joined
member_since
date_of_birth
dob

Yes, this was a short simple post. But freekin' necessary.

Until next time,
David

Sun + MySQL: One Week Later

I really like the 21st century open source technology community. 20 years ago, if a company bought out another company, everyone would have their own island of opinions and response, and you would not know if you were on-track or even if the publicized reports were on-track either.

Today, it is amazing to see the responses around the boards and blogs, which seems to keep the mainstream reports in-check, most of the time (including the picture on the left). I must admit I was checking to see what the "dirt" level of the buyout would end up, but all-in-all, this is something that most people seem to be confident about: this is going to help MySql and Sun in the long run. MySql will likely have a revamped service offering (the price gap between the community and enterprise versions is still sizable for small companies), Sun can integrate MySQL into their OSS, giving Solaris a bit of a facelift.

But where the rubber will meet the road is exemplified in how Sun will identify and utilize MySQL's existing strengths and run with them. Continue to improve InnoDB and MyISAM; I'll give a grace period for Falcon as that appears to have promise, and the third party engines like Brighthouse are fine too, as those are not financed my Sun.

Another place where I look forward to Sun's involvement and direction with MySQL is with replication and clustering. Linux heartbeat is a great utility we use now, and I may see hope with the NDB disk-based cluster when we have 5.1 in production.

I also am looking forward to a comprehensive binary backup utility (beyond MyISAM) in MySql; in my experience, mysqldump is trumped by rsync. Currently we end up doing both rsync and mysqldump on our system, and our recovery works almost like Oracle's recovery manager (...and instead of depending on rman to produce the best backup recovery procedure, I use a few of my brain cells).

After reviewing the posts generated through PlanetMySql.com, and tech articles written by respected journalists, and a newly released report from Gartner, the mood is very positive for the future of MySql.

Until Next Time,
David

An exercise in SELF JOINing

There was only so much I could do for my 1976 Mustang. I did not have money to put an Edelbrock head in, so I spent what little I had in a new stereo, a tinted back window, a new muffler that increased the neighborhood noise level a notch, and a couple of other random parts. In the end, it really did not go any faster, and I was $650 poorer.

I liken my experience with SELF JOIN to my 1976 Mustang. Sure, it was fun to use and figure out how I could make it work in my application, but I had a feeling that it might not pull ahead when the light turned green in production.

The Problem

1. Records are inserted (using INSERT IGNORE) into a table based on DISTINCT first name, last name, address1, address2, city, state, zip, and email.
2. We needed to select out records that had a distinct address1, address2, city, state and zip, picking up the most recent first name and last name within specific zip code areas (first 3 numbers of the zip code)
   

The SELF JOIN Solution

I had an "aha" solution, thinking that I could self join the distinct address from the same table with the most recent first name and last name. So off I went in my quest...

SELECT a.first_name, b.first_name, a.address1, a.address2, a.city, a.state, a.zip FROM main_table a INNER JOIN main_table b ON a.address1 = b.address1 AND a.zcf IN (123, 456,789) GROUP BY a.first_name, a.last_name, a.address1, a.address2, a.city, a.state, a.zip HAVING a.signup_date = MAX(b.signup_date) LIMIT 10000;

Results

Well, I was very pleased that it worked so well and quickly in my dev environment of a few thousand rows. I was ready to tell the world that SELF JOINs are fun and profitable.

But then I did an EXPLAIN on the statement and this came up:

Extra: Using temporary; Using filesort

My dev table was only 10,000 rows, but my test environment had several million. Not good!

My Table Hack

Maybe someone could help me improve on my SELF JOIN skills, but based on the business requirement that I would be picking out zipcode-based data sets on a daily basis, I did not want to wait everytime one of these requests ran.

So... I created a table that would include distinct address information with the most recent first name / last name, and a trigger that will populate this table based on this very criteria. It took a little over two hours to insert several million rows, but now I can have the joy of performing this statement instead:

SELECT fname, lname, address1, address2, city, state, zip FROM main_table WHERE zcf IN (123,456,789) LIMIT 10000;

Using the EXPLAIN statement produced the following predictable result:

Extra: Using where; Using index

It is another worker bee script that I don't have to worry about on a daily basis. It produces results quickly, and everyone gets what they needs. For fun, I did try the SELF JOIN on my test table and it took longer than a day to complete. Oh well...

I now drive the family SUV, with no modifications, all standard equipment. And I know it would smoke my old 1976 Mustang off the line anytime.

Til next time,
David

How to Send a Report on Most Common Domain Names without Grinding Your DB

This is a continuance from my previous entry on reversing an email address to search for a domain. Minutes after I ran the following query,

SELECT COUNT(1) FROM rv_emails WHERE rv_email LIKE REVERSE('%msn.com');

I was asked to do a count of the top 50 domains in our table of email addresses.

So, I simply changed my previous route by performing the following steps:

1) Add a 'domain' column to my table:

ALTER emails ADD COLUMN domain CHAR(30) NOT NULL;

2) Populate the domain column:

UPDATE emails SET DOMAIN = RIGHT(email, LENGTH(email) - INSTR(email,'@'));

3) Select the top 50 domains by doing the following:

SELECT domain, COUNT(1) FROM emails GROUP BY domain ORDER BY COUNT(1) DESC LIMIT 50;

There are a couple of items to note here:

• No need to use the word DISTINCT as this is implied by GROUP BY;
• ORDER BY COUNT(1) DESC does add "Using temporary; Using filesort" to the EXPLAIN statement, but on a 5 million record table, this took 7.78 sec. Another way to do this is to add "HAVING COUNT(1) > 5000" or some other arbitrary number and write these to a temp table for sorting the final results
  

This solution turned out to be very good for our reporting purposes, so I now have a trigger that updates the domain column every time an email address is inserted. I would presume a better way is to have php calculate the domain name at the time of the insert, but we have dozens of pages to go through, and a programmer might unknowingly skip this step on a page that would be developed in the future. So, I think I will be keeping the trigger in place forever.

Until next time,
David

How to Find Domain Names of Emails Without Using LIKE '%domain.com'

I like working at companies where there are "problems related to success". My colleague and I from a former company that I worked for in LA talked about two types of problems faced by business:

1. Problems related to failure - the problems of having your doors open for business but few people know about it;
2. Problems related to success -the problems of having so many people come through your doors that you are trying to figure out how to handle it
   

The world of web is very much like this. Rarely would one hear that a company is in the "sweet spot in the middle", and if a company is in such a position, everyone is very quiet about it as to not the jinx the atmosphere around it. Instead, you hear "We just need to bring our numbers up by promoting 1,000 more youtube videos", or the other end - "We just brought in three racks of servers and we can barely keep up".

And, as it happens, "problems of success" fall on the lap of the mysql DBA. As many DBAs should be aware, we need to prepare for the future, before people start calling you a Disaster Briefing Analyst instead of Database Administrator.

One of these moments concerns us with the LIKE statement. We all hope that we don't need to use LIKE with the wildcard % in the front. But, as it happens, with tables containing email addresses, an business analyst will request a count of all msn.com-based email addresses.

How to do this without LIKE '%msn.com'?

REVERSE to the Rescue

Just reverse the email address in the table and then reverse the domain you are searching for. Here's how to create a table for the testing:

CREATE TABLE rv_emails (rv_email_id INT UNSIGNED NOT NULL AUTO_INCREMENT, email CHAR(50) NOT NULL, rv_email CHAR(50) NOT NULL, PRIMARY KEY (rv_email_id), INDEX idx_email (email), INDEX idx_rv_email (rv_email));

When I SELECT COUNT(1) FROM rv_emails WHERE email LIKE '%msn.com' when this table has a million records, it takes 1.28 sec to retrieve a count 17,594 records. Now try this on for size:

SELECT COUNT(1) FROM rv_emails WHERE rv_email LIKE REVERSE('%msn.com');

How long did it take for you? A little better, eh? (That's my Canadian vernacular coming through) For me, it was .03 sec to achieve the identical result. An improvement of about 40 times.

Just for fun, here are the results when the table has 5 million records:

• Old method: 6.69 sec
  
• New method: 0.19 sec
  

Fun stuff!

Until next time,
David

My One Night mySQL Road Trip

I like driving. It relaxes me. I especially like driving in the Carolinas versus driving the freeways in Los Angeles. In LA, you have to intentionally calm yourself down before going to the on ramp of the 101, 5 or the 10. Here, in South Carolina, it is possible to drive highway speeds on the highways (in LA, it is possible, but only at night time or early in the morning).

When I heard that the Durham mySQL meetup had Jay Pipes over, I had to go. Thus, my Carolinas road trip, from Columbia, SC to Durham, NC. That was about the length of three CDs. Nice.

And, as always, when you connect with like-minded individuals in the industry, I *always* pick up on a few new techniques. It's like the same idea Sheeri talked about when seeing another side of things when in the presence of other mySQL DBAs.

As a result, this has become my list of "To-Do's" at our shop here. As each one gets done, I'll blog about it and turn each of these items into a link. So, without further ado, here goes:

• Vertical partition infrequently updated fields in one table and frequently updated fields in another. We have a couple of tables that could use this, but the programming ramifications could be more significant than anticipated;
• Remove redundant/poor indexes;
• Think in terms of sets instead of loops - get comfortable using derived tables;
  
• Take out non-deterministic values in our reporting queries
• Turn MyISAM DELETES and UPDATES into batches
• Convert "email LIKE '%website.com'" queries into "rv_email LIKE (REVERSE('website.com'),'%')" queries. Already did that today - worked like a charm! I'll blog about it tomorrow.

That's all for today!

Til next time,
David

Creating Copies of Tables: MS SQL vs. MySql

I was reminded the other day how SQL Server was annoying in regards to table structure changes. All I wanted to to was copy a table (with structure intact - keys, dependancies) with its data.

How hard could that be?

MS SQL in Action

First, I needed to do a complete DDL on TableOne and replace every instance of the word "TableOne" with "TableTwo". It works, even though it is bulky and takes time, especially when the DDL was 68 lines long.

The second step was not too bad.

SELECT * FROM TableOne INTO TableTwo
GO

Ok - that did not seem too hard, until you see how this can be accomplished in MySql.


MySql's Turn

CREATE TABLE table_1 LIKE table_2;
INSERT INTO table_1 SELECT * FROM table_2;

Which looks easier to you?

Here's another wrinkle: what about table-level permissions? Which side is easier to manage?

Until next time,
David